플랜지 고정 커플링

Rigid Clamping Shaft Couplers ---Cast / Stainless Steel Rigid Clamping Shaft Coupler Maintenance Free Product Description Characteristics of drum type gear coupling 1.drum tooth type coupling bearing capacity 2.angular displacement compensation 3.drumgear coupling drum tooth surface contact condition of inner and outer teeth are improved, to avoid the angular displacement under the condition of straight tooth end edge extrusion, stress measuringmethods concentration, while

Drive Heavy Duty YL Rigid Flange Coupling Product Description YL flange coupling and YLD flange coupling are manufactured in accordance with the national standard GB5843-86. This type of coupling is mainly suitable for connecting two coaxial cylindrical transmission shafts, and the nominal torque transmitted is 10-20000N.m. There are two main structural forms of YL flange coupling: ① The two-axis alignment is achieved by using bolts in the hinged holes and the torque is

Clamp Type Shaft Coupling With Locking Device JQ type-jacket coupling Product Description The JQ type shell coupling has the following characteristics: 1, light weight, ultra low inertia and high sensitivity; 2, maintenance free, super strong anti oil and corrosion resistance; 3. The eccentricity can not be allowed, and the shaft should be exposed as far as possible. 4. The main material is made of cast steel / stainless steel. 5, the fixed way is clamped, the top wire is

WH Type Oldham Metal C45 Steel Cross Slide Coupling For CNC Machine And Roll Plate Straightening Machine WH slider type coupling WH(KL) slider coupling is a kind of inelastic element coupling, mainly used to allow the connection of two axes with radial offset, composed of two end faces with groove half coupling and the middle square slider, the use of the middle slider on both sides of the corresponding radial groove of the end face of the half coupling, in order to realize

JQ Clamp Rigid Shaft Split Coupling Product Description Stainless steel clamp coupling is a commonly used stainless steel coupling. It is used for the connection of two stirring shafts when the stirring shaft of the reactor is too long and is manufactured in two sections. If the output shaft of the vertical reducer is connected with the stirring shaft of the reactor, use The clamp coupling should be put forward when ordering, so as to use non-standard requirements for the